This is a great and very thorough article about mold inspection Maryland and mold testing that is relevant in Baltimore, Washington County and the whole State of MD. It was written by a certified mold inspection professional who uses a mold scent dog to detect mold in peoples homes.

If you are looking at a serious mold problem, be sure to read this information from another excellent mold removal expert.

Next, be certain to watch Maryland physician, Dr Ritchie Shoemaker discuss biotoxins, mold and more, just below.

Mold Inspections And How To Make Good Choices

Maryland home mold inspection and mold testing Baltimore homes and / or office buildings and work places can require numerous expenses. Read this article for more information plus, see the Mold remediation in Maryland article as well. Finally, I have included a video just below, with more information about mold detection and inspection no matter where you live.

Before a person ever decides to search for the best mold inspection company in their area, they should first know a few facts:

1. In the author’s opinion, every house on the planet has mold in it. Mold is a member of the Fungi family and exists naturally in our environment. It is airborne and enters our houses whenever a door or window is open and in numerous other ways.

2. Inside of a house, mold will not be a problem unless it has been exposed to water for more than 48-72 hours. So, if you have seen, or know of evidence of water inside your house and you suspect that it has been there for at least 48 hours, you are most certain to have harmful (toxic) mold.

3. Even if you can’t see any water, it still may be lurking behind your walls, sinks, or tubs; perhaps under windows or other locations. If you can smell a musty or unpleasant odor (some in the family may detect it while others can’t), you have a harmful mold problem.

4. If you or other members of your house have asthma, other respiratory problems, coughing, runny nose or eyes, headaches, or tend to feel much better when you are away from the house and worse when you are in it, you almost certainly have a mold problem.

Knowing that you likely have a mold problem but not knowing what to do next, speaks volumes in favor of hiring a professional. But which one? Before hiring that mold professional, read this to see if you can do the Maryland mold inspection and removal yourself. You could likely have several mold inspection companies to chose from on sites like Yahoo or Google; but how does a homeowner find the best one for their needs?

Mold Inspection Companies in Maryland - Choosing The Right One

First I recommend that the company specializes in mold. Not mold and or radon, lead, air ducts, etc. Next, I recommend that they have both education and experience at least equal to or better than their competitors. While most every state requires that home inspectors be licensed, only two states require so of mold inspectors. Are they certified? This would tell you that they cared enough about their profession to acquire knowledge and training to meet standards. Experience counts. How long has the inspector been certified? How many jobs have they performed? Not just the company, but the individual inspector? Can they get references? Have they been cited by the Better Business Bureau for any deceptive, misleading, or dishonest practices?

The next criteria is critical: Are they also in the business of mold remediation in Maryland or removal? If they are it could be a blatant conflict of interest. Wouldn’t it be to there interest to overstate the level of mold problems and/or the amount of remediation needed if they were in line to pick up a job worth several thousands of dollars? Therefore, I recommend that you find a professional who only inspects for mold.

OK, so now how should your inspector look for and find your problem? When they are finished will they be able to tell you for certain where your mold is and why you have the problem? Isn’t that how you would like to spend your money?

Testing for mold is most often done by the old fashioned method called air testing. This procedure sucks air into a machine that then traps it into a laboratory testing dish, which in turn gets sent to a laboratory for culturing. This process can take a week or more for the results. When air testing is performed, the inspector should always take one test outside of the house in order to determine a benchmark as to what mold(s) are prevalent in your area. They then will try to take as many tests inside of the house as the customer can afford. In most areas of the country, these tests cost about $100 each. Some of the problems with air testing are:

1. The more tests that are performed, the more costly the job.

2. Air testing can be inaccurate. All it can do is to tell you what was in the air at that location at that moment in time. Results can vary widely over time and method used. Airborne fungal spore concentrations vary greatly over the course of hours, days, weeks, and seasons.

3. In colder climates when there is snow on the ground, the results of the outside test will be useless in that spore count is greatly or totally reduced. I have yet to hear that a customer was told this fact.

4. There are no numerical standards to which tests can be prepared, making interpretation difficult.

5. Even the best tests can not determine how much exposure people in the house have had in the past.

6. Fungal air tests are expensive.

7. Sometimes, the results are slow coming in.

8. Knowing the type of mold does not change the way that you would respond. All mold that is active, or was active, is bad mold.

Baltimore AAA Home Inspector Mold Inspector & Statewide  Maryland - More Ideas

Then what does represent a professional, accurate, and helpful mold inspection? The most intelligent inspections should: Find all mold. Determine the cause; i.e. Where is the water problem. Explain how to fix the problems.

This inspection requires work, experience, and knowledge. It is also labor intensive; lasting about 2 hours or more on average. It begins with an intensive investigation of the property outside of the house. It finds flaws in roofs, chimneys, gutters, downspouts, foundations, and/or landscaping. In short, anywhere and any way that water could get into the house and cause a problem. Then, moving inside the inspection closely is conducted looking throughout the house, basement, and attic for issues under windows, sinks, tubs, showers, washer and dryers. Tools such as moisture meters, hygrometers, and boroscopes should be utilized as appropriate.

Following that, in my inspections, I work with a Certified Mold Dog. Together we systematically cover every inch of the house. Dogs such as mine have the ability to detect the scent of mold in one part per trillion. Humans are limited to one part per hundred. Two university studies are known that matched dogs scenting ability versus that of machines. Dogs won easily both times.

Dogs have the ability to detect the scent of mold from behind walls, floors, or ceilings where it often is found. No machine can do that. With their ability to pinpoint the location of the mold, remediation costs are reduced to a fraction of what they may have been, or eliminated entirely.

Lastly, the customer should ask for, and receive a professionally written report that captures all that was seen, found, and measured during the inspection and remediation recommendations. This is how my company, Mold Rover, Inc. operates. It is what I think the customer needs and deserves for their money.

Watch this excellent video from Dr Shoemaker, a Maryland physician discussing mold toxins, and other illness causing biotoxins.

Mold testing, inspection related news from around the blogosphere and other internet sources.

Finally - Natural and Organic Mold Cleaning Products That Really Work
It took them a while to develop a "green" mold killing product that would break mold up at the DNA level.

Baltimore Mold News: Hutchinson News Online
BALTIMORE - Parents have long known that the polluted, pollinated air outdoors can bring on asthma attacks in their children. Now it turns out that many asthmatic inner-city kids are under assault inside their homes - where cigarette smoke, dust mites,mold and cooking smells can make them sicker than car exhaust or ragweed. Researchers are finding a direct link between the air children breathe at home and the asthma attacks that are the source of hundreds of thousands of [...]

Mold Inspection Maryland - The Challenge of Mold
Drees was informed, and in February 2007, the company hired a contractor to do an inspection. The inspection turned up mold, and the contractor made recommendations for removing it. The next month, the Mengs received a letter from Drees. Last March, the Mengs went to see Ritchie Shoemaker, a doctor on Maryland’s Eastern Shore who specializes in illnesses caused by water-damaged buildings.

Black Mold Exposure - A Documentary Feature Film
RITCHIE SHOEMAKER, M.D., Maryland physician, specializes in treating biotoxin illnesses. Has made a number of national television appearances. SNOOPS, canine mold inspector.

Save on Maryland Mold Inspection, Testing And Removal Services
H&H Environmental: mold testing and removal services. In the winter, warm, air-restricted homes provides the perfect environment for. The Industry Leader in Mold Removal and Prevention Serving New York, New Jersey, Connecticut, Pennsylvania, Massachusetts and Maryland.

Author: Joe Tomaselli

Technorati Tags: baltimore, detection, inspector, maryland mold inspection, md, mold remediation maryland, mold testing baltimore, Ritchie Shoemaker, testing, video, washington county